|
Synchronous Motors & Generators
GE has the capability to design and manufacture electrical rotating machines up to 100,000 HP. A century of achievement has built a rich tradition of technical excellence, quality and reliability. |
|
|
Large Synchronous Machines Series 9000
GE has the capability to design and manufacture electrical rotating machines up to 100,000 HP. A century of achievement has built a rich tradition of technical excellence, quality and reliability.
|
|
Quadramatic™ Large Synchronous SAG and Ball Mill Drive Systems
Up to 30,000 HP; Up to 22,000 kW; Up to 15,000 Volts; Synchronous Motors.
|
|
Synchronous Hydro Generators
Incorporates a full range of features to address various applications and operational conditions. Each design is customized for site-specific applications. Horizontal Rating: 2,000 kVA − 31,250 kVA,Vertical Rating: 3,000 kVA − 37500 kVA.
|
|
Steam and Gas Turbine Generators
AC designs up to 75,000 kVA.
|
|
|
Pegasus™ MHV − Horizontal
Pegasus MHV yields more horsepower per frame size and improved efficiency along with power factor all awhile decreasing the overall weight of the motor. Pegasus MHV is offered in a range from 500 to 22,000HP in NEMA or IEC designs.
|
|
Pegasus™ MHV Wound Rotor
NEMA Frames 8100-8500. 1,000-10,500 HP. IEC Frames 500-710. 750-7830 kW. Commonly used in the cement, mining, and mineral processing industries for crushing and grinding applications.
|
|
Custom 8000
Designed and manufactured to meet the typical requirements of a variety of applications in the chemical and petrochemical plants, mining industry, pulp and paper mills, steel mills, cement plants, water and sewage treatment plants and more.
|
|
|
Quantum™ LMV − NEMA
GE is proud to introduce its new line of medium voltage totally enclosed fan-cooled (TEFC) induction motors called Quantum LMV. It is offered in the range of 200 to 2000 HP in NEMA, IEC and up to 6600-volt designs.
|
|
X$D Ultra® NEMA Premium Efficiency - TEFC
GE is a leading manufacturer of NEMA Premium extra severe duty motors. The X$D Ultra which is a product of ecomagination provides a low overall life cycle cost.
|
|
A$D Ultra Inverter Duty
GE provides AC motors for use on variable frequency drives (VFD). These motors are manufactured to withstand an infinite: 1 constant torque speed range. Motors are designed to withstand the modern switching frequencies of today's IGBT's.
|
|
Energy $aver® - TEFC Severe Duty
GE has been manufacturing premium efficient motors since the late 1970's. The latest Energy $aver design meets EISAct (Energy Independence & Security Act 2007) efficiency levels.
|
|
Energy $aver® NEMA Premium Efficiency − ODP
GE is a strategic manufacturer of open drip proof (ODP) motors that meet NEMA Premium efficiency standards. These motors are designed to provide the owner the quickest payback for their investment.
|
|
|
|
Quantum™ LMV - IEC
GE is proud to introduce its new line of medium voltage totally enclosed fan-cooled (TEFC) induction motors called Quantum LMV. It is offered in the range of 350 to 2000 HP in NEMA, IEC and up to 6600-volt designs.
|
|
X$D Ultra® 841 IEC
The X$D Ultra 841 IEC builds on the X$D (Extra Severe Duty) legacy of reliable motors designed to save you money and meets or exceeds the intent of the IEEE 841-2009 Standard.
|
|
X$D IEC
The X$D IEC meets or exceeds the requirements for most industry specifications in IEC construction. It has an advanced insulation and bearing system, one-year warranty and advanced features.
|
|
|
Pegasus™ MHV − Vertical
AC induction motors − vertically mounted. 500 to 8500 HP. 373 to 6300 kW. Commonly used in the petrochemical, power generation, water & waste water industries for centrifugal pumps, boiler feed pumps and multi-stage high pressure pumps.
|
|
8200-8900 Frame Vertical
Power: 500–12500 HP (9,000 kW)
|
|
ValueLine™ Vertical Hollow Shaft
GE ValueLine vertical hollow shaft (VHS) of the WPI product line is a high thrust design, designed for deep well pump applications. The ValueLine product offering ranges from 5 - 300 HP and is compatible with a variable speed drive.
|
|
Custom Vertical
GE manufactures custom vertical motors for pump applications. This product offering ranges from 2−800 HP and is available in WPI, WPII, or TEFC enclosures.
|
|
|
Kinamatic® Explosion Proof
The KINAMATIC Explosion-proof (XP) motor is a totally enclosed machine with a housing constructed to contain within the motor any explosion caused by the hazardous atmosphere entering the enclosure and being ignited.
|
|
Kinamatic® General Purpose
GE's Kinamatic motors are available in totally enclosed and open drip proof enclosures. Used for industrial applications such as rolling mill, extruders, cranes, conveyors and printing presses.
|
|
CD6000 DC Motors
GE has been designing and manufacturing DC machines for over 100 years. These industrial designs are offered in the range of 500 to 3000 HP for many industrial applications.
|
|
MD800 DC Mill Duty
This armored mill motor meets AIST standards.
|
|
|
Major Appliance
GE is a strategic provider of high quality, custom-designed motors to the major appliance industry.
|
|
Separately Excited
GE supplies separately excited DC motors for high volume OEM battery-powered applications from 24 to 72/80 volts; frame diameters from 6 5/8" to 13".
|
|
Series Wound
GE supplies series wound DC motors for high volume OEM battery-powered and rectified power applications from 12 to 180 volts; frame diameters from 6 5/8" to 13".
|
|
|
|
Buy Online!