Contact

Header Top Menu

United States

Search Google Appliance

GE’s New GP100 Line of 6-Kilowatt Rectifiers

GE’s New GP100 Line of 6-Kilowatt Rectifiers Provides Data-Hungry Applications with Industry-Leading Power Conversion Efficiency

March 18, 2015
  • Advanced Solutions Mark First Products Available in GE’s New High-Power, Space-Saving Rectifier Line
  • Ideal for Data Center, Telecommunications and Supercomputing Industries, GP100 Provides the Highest Power Density in the Industry for 1U, Three-Phase Rectifiers
  • Developed Using GE’s FastWorks Methodologies, the GP100 Addresses System Architecture Design Challenges that Arise Due to Footprint Limitations
 
DALLAS — March 18, 2015 — GE’s Critical Power business (NYSE: GE) today introduced its new GP100 line of power rectifiers, providing data- and power-intensive three-phase applications with the industry’s first compact, 1U , 6-kilowatt (kW) 54-volt AC-to-DC power rectifiers. The new GP100 line includes GE’s GP100R compact, module for data center and telecommunications rack or cabinet mounting and its GP100M for embedded data, networking and industrial power supply solutions. 
 
Ideal for high-density data and communications settings, the new GP100 AC-to-DC rectifiers feature a power capacity of 6 kW and take up less than half of the space required to install similar products—enabling two GP100s to be mounted together in 1U of rack space. This combination of power capacity and reduced footprint enables GE to provide an industry-leading power density of 12 kW per 1U, making the GP100 the highest density three-phase power supply available today. The GP100 rectifiers also can be paralleled into packaged systems ranging from 12 kW to 432 kW, providing efficient power to high-density and high-capacity applications such as 48-kW power bays and cabinets. This enables these applications to implement three-phase power supplies instead of being limited to less-efficient, single-phase options due to space requirements. 
 
“Three-phase rectification frees system designers from the burden and complexities of phase balance and offers a simple, swappable solution,” said Karim Wassef, general manager of Embedded Power, GE’s Critical Power business. “Enabling three phase in 1U combines the best of both worlds without compromise.” 
 
With an energy conversion efficiency level of up to 96.5 percent, the GP100 line provides benefits of both operational cost savings and improved total cost of ownership. The new rectifier product line also helps eliminate potential single-phase balancing issues as power requirements grow by ensuring that electrical phases grow in equal increments. 
 
“There isn’t a power design engineer out there who isn’t trying to get more power in less space,” said Vito Savino, general manager for DC power systems, GE’s Critical Power business. “It’s all about reaching new levels of power and density, whether it’s at the board, rack or bay level. With this compact three-phase, 6-kW, high-power solution, which takes advantage of the three-phase power already being used at a facility, we’re helping our customers in their drive for larger, yet more efficient, data, communications and computing capacity.” 
 
The new GP100 rectifiers were developed using FastWorks methodologies, a set of tools and principles that integrate external thinking and discussion into the design process, bringing the products to market faster than previously possible. Using FastWorks, GE was able to take feedback from customers regarding their power needs and their space limitations and directly apply it to the design of its new rectifiers. For example, in many applications, the installation of three-phase power supplies required customers to increase the size of their box or equipment to accommodate the size of the units. In addition, the amount of power capability per bay in the telecommunications industry is reaching a finite limit. With this information, GE was able to design a new rectifier with a smaller footprint and thus, a higher power density—providing customers with the technology they require to address these issues. 
 
GE’s New Rectifier Platform
 
The GP100 is the new building block for system architecture and design in DC output products. While other rectifiers in the industry may be limited to installations in traditional system architectures, the GP100 will challenge how and where a rectifier can be used. Offering a very usable form factor and high-density footprint, GE’s new rectifiers provide the flexibility needed to meet the power capacity challenges of applications across a wide spectrum of industries. 
 
The GP100R and GP100M add to GE’s new GP100 rectifier line of power conversion products. The platform also includes a 1U, high-density product that is specifically engineered for single-phase power supply designs. The rectifier platform also offers expanded communications and diagnostics, such as black box capture capability, field installable firmware upgrades and improved AC measurement accuracy. 
 
The company is taking qualification orders on the new GP100M and GP100R products now. For more information on GE’s GP100R and GP100M rectifiers or its complete line of energy-efficient rectifiers, please visit http://www.geindustrial.com/products/embedded-power/gp or call +1 972 244 9288. 
 
GE’s Critical Power business powers rapidly changing, disruptive markets where massive data, communications and computing capacity is redefining how business is done. Customers in data center, super computing, telecommunications and digital content industries rely on GE to provide the reliable and energy-efficient power to keep networks flowing and transactions moving 24/7. To learn more about GE’s Critical Power business, visit www.gecriticalpower.com.
 
 
About GE
GE (NYSE: GE) imagines things others don’t, builds things others can’t and delivers outcomes that make the world work better. GE brings together the physical and digital worlds in ways no other company can. In its labs and factories and on the ground with customers, GE is inventing the next industrial era to move, power, build and cure the world. www.ge.com
 
Follow GE’s Critical Power business on Twitter @GEcriticalpower.
 
###
For more information, contact:
Ellen Zeidler
GE 
Critical Power
+1 972 244 9497  
 
 
Matt Falso or Howard Masto
Masto Public Relations
+1 518 786 6488
 
 
¹  A “U” is a measurement unit used in relay racks equal to 1.75 inches of vertical equipment space.